Skip to content

Serial To TCP Converter

Default Setting

DEVICE IP : 192.168.0.213
SUBNET IP : 255.255.255.0
GATEWAY IP : 192.168.0.1

Setting Command from LAN

Send      : %{,??,INFO,}!
Response  : 

DHCP Enable/Disable:
Set       : %{,??,TBL,5,1,ENABLE/DISABLE,}!

            %{,??,TBL,5,1,1,}!      // ENABLE = 1
            %{,??,TBL,5,1,0,}!      // DISABLE = 0

Get       : %{,??,GETTBL,5,1,}!
Response  : <<,13,GETTBL,5,1,1~,>>{0D}{0A}

Device IP:
Set       : %{,??,TBL,6,4,192~168~1~101~,}!
            IP = 192.168.1.101

Get       : %{,??,GETTBL,6,4,}!
Response  : <<,13,GETTBL,6,4,192~168~1~206~,>>{0D}{0A}

DNS IP:
Set       : %{,??,TBL,11,4,8~8~8~8~,}!
            IP = 8.8.8.8

Get       : %{,??,GETTBL,11,4,}!
Response  : <<,13,GETTBL,11,4,8~8~8~8~,>>{0D}{0A}

Gateway IP:
Set       : %{,??,TBL,16,4,192~168~1~1~,}!
            IP = 192.168.1.1

Get       : %{,??,GETTBL,16,4,}!

Subnet IP:
Set       : %{,??,TBL,21,4,255~255~255~0~,}!
            IP = 255.255.255.0

Get       : %{,??,GETTBL,21,4,}!

MAC ID:
Set       : %{,??,TBL,55,6,234~14~10~0~0~1~,}!
            MAC Address = EA:0E:0A:00:00:01

Get       : %{,??,GETTBL,55,6,}!

Device Server Port Number

Set       : %{,??,PORT,26,2,1234,}!

Get       : %{,??,GETPORT,26,2,}!
Response  : <<,13,GETPORT,26,2,1234,>>{0D}{0A}

** Note: PORT 80 is reserverd **

Restart MCU

Set       : %{,??,RSTMCU,}!

Note      : Do Not Use This Command.

Note : Hold reset switch for 5 seconds while device boot to reset setting.

Documents

Open a IP Finder

  • Used to find IP of device.
  • Command to reset device setting.